Shiny Turtles

And this is what he looks like after a little cleaning up

It's turtles all the way down !

I've moved up from aluminium to bronze.

I started by making a stand for the crucible. That way it stays upright when the charcoal burns. Makes life easier.

I also prepared a bucket of charcoal broken into small lumps, about 2cm on the longest side. They would be easier to load, and burn fast and hot.

I had a lot of fun putting charcoal into the furnace without getting it into the crucible on the Al melts, so I made a sheet metal cone with a handle. I simply covered the crucible and shovelled in the charcoal. Less time with the furnace open.

And I kept it topped up. Once the furnace calmed down from a raging fury, I added more fuel.

It still took a long time to melt the bronze, but the turtle turned out pretty well for my first bronze case, and my second sand cast of anything.

A little tidying up to remove the flashing (I need more practice at making the sand molds) and a little cleaning up with a buffing wheel and this guy's a keeper.

That looks HOT

Charcoal and a blast of air from the output of a small shop vac.

They cleaned up ok

A little time with a belt sander, and a flap wheel and now they look presentable.

They were just a learning exercise, so I won't be going through the grits to make them look pretty.

I had on charcoal inclusion. I need a better skimmer than a piece of plywood.

Nothing a grinder won't fix

 Thanks to Oliver, for dropping over to help out with my first attempt to cast something other than Aluminium Mc Muffins.
Having ingots which were easy to manage made things nice and simple from the point of view of the melting.
I made a few mistakes with the green sand, including forgetting the parting dust! But the flask came apart so well we went with it anyway.
I need to grind / file off the flashing, and then drill a pair of mounting holes.
It was a good learning experience. I could see a few things that went wrong, and I have a few ideas how to make things better next time. Video may follow, but that involves editing and uploading, so it may not follow too quickly.